How To Measure For Blinds In A Window
Introduction
Observe the rails depth for your chosen blind using our handy table. Make a note of this before you start measuring.
Choose from the three plumbing fixtures options. then measure out your bay windows with a metal tape measure, using the instructions for your called option.
If your side blinds are going to run up to a wall, deduct 5mm from your final measurements.
| Blinds Type | Depth (MM) |
|---|---|
| Aluminium Blind | 35mm |
| Roman Blind | 40mm |
| Pleated Bullheaded | 40mm |
| Roller Bullheaded | 50mm |
| Wooden Blind (25mm slats) | 60mm |
| Wooden Blind (27mm slats) | 60mm |
| Wooden Blind (35mm slats) | 60mm |
| Blinds Type | Depth (MM) |
|---|---|
| Roller Blind (Face up Fix) | 70mm |
| Vertical Blind (Acme Set) | 73mm |
| Vertical Blind (Confront Fix) | 73mm |
| Wooden Blind (50mm slats) | 80mm |
| Wooden Blind (64mm slats) | 80mm |
| Vertical Blind (Medium Face Set up) | 91mm |
| Vertical Blind (Large Face up Set up) | 107mm |
Option 1
For this option, the front blind fits from corner to corner, with the side blinds installed upwards against the front end bullheaded. For your front blinds, measure the full width of the bay and so subtract 15mm and choose 'exact fitting' when ordering.
Measure out the width of each side blind seperately in the same fashion then deduct the rail depth from each to go your final measurements. The side blinds should and then be ordered as 'exact plumbing equipment'.
Handles, openers and vents
If you have any obstructions protruding from the front window, measure how far they stick out past the window.
Option two
To make sure this is suitable for your window, check the size of your window frame, going from the corner of the bay to the start of the glass frame pane one the front and so the sides. If any of these measurements are smaller and then the rail depth of your blind then your blinds will not cover the drinking glass and in that location will be noticeable gaps. In this instance, we recommend y'all consider another plumbing fixtures choice.
In this manner all three blinds meet in the corner of the bay without overlapping, creating an empty foursquare space in the corners. Measuring is straight forward, just measure all three sections straight into the corners. Deduct the runway depth from the measurement for each of the side blinds and deduct double the track depth from the measurement for the front end blind. Finally order all as 'verbal plumbing fixtures' blinds.
Handles, openers and vents
Obstructions on the front of the window will reduce the width of the side blinds. Measure how far the obstructions protrudes past the window frame and deduct that from the side bullheaded measurements.
Obstructions on the side windows will reduce the width of the front end blind. Measure out how far the obstruction protrudes past the side window frame and deduct that from the front blinds measurements.
Selection 3
If your side windows are as well pocket-size for the other options, then this will exist the near suitable option for you lot. In this selection, the side blinds continue into the corners and the front blind sits betwixt them. Measure the sides into the corner then subtract 15mm, use this measurement to order both equally 'exact fit'. Mensurate across the front and so deduct double the rail depth and lodge as 'exact plumbing equipment'.
Handles, openers and vents
Obstructions on the side windows volition reduce the width of the front end bullheaded. Measure how far the obstruction protrudes by the side window frame and deduct that from the front blinds measurements.
Important
Always cheque the widths in three places equally you would for a regular refular recessed window. Bay windows are prone to movement and you lot may notice that the width vary even if at kickoff glance the windows expect square. It is always the smallest of the three measurements that you should use.
Drop
This is the same for all three options. It will simply be from the point where the blind is being mounted downwardly to the window sill. Recollect that the head runway is included in the drop and that you volition need a flat space of at least 50mm (5cm) to mountain the brackets securely.
Source: https://www.blindsdirect.co.uk/measuring-blinds
Posted by: chadwickablemplaid.blogspot.com
0 Response to "How To Measure For Blinds In A Window"
Post a Comment